Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 107
DOOR FRAME REMOVAL
NOTE:
In four door models, the rear door frames must be
removed first, followed by the front door frames.
1. Using the provided #40 Torx head driver and
ratchet, loosen the Torx screws located on the
underside of each door frame (two per door).
Door Frame Screw Locations
2. Once all the way loosened, remove the screws
by pulling downward.
NOTE:
Screws will not fall out once completely loose, as
they are held in place by an internal mechanism.
Remove Screws From Below Frame
3. Lift the frame upward, removing it from the
vehicle.
Step Three
4. Store screws in a secure location.
5. Repeat procedure on the front door frame
(four door models).
DOOR FRAME INSTALLATION FOUR
D
OOR MODELS — IF EQUIPPED
1. Install the front door rail first.
2. Carefully place the front door rail in the rubber
seal at the top of the windshield, and line up
the holes for the Torx head screws (two for
each door).
WARNING!
Do not drive your vehicle on public roads with
the door frame(s) removed as you will lose the
protection that they can provide. This proce-
dure is furnished for use during off-road oper-
ation only.
Do not drive your vehicle on public roads with
the doors removed as you will lose the protec-
tion that they can provide. This procedure is
furnished for use during off-road operation
only.
2
22_JL_OM_EN_USC_t.book Page 107
Loading ...
Loading ...
Loading ...