Loading ...
Loading ...
Loading ...
92 GETTING TO KNOW YOUR VEHICLE
4. Making sure the lift assist mechanism is in the
“lock” position, lift the soft top into the rear of
the vehicle with the side links pointing toward
the front. Lower the lift assist mechanisms
onto its retainers on both sides (on the inside
of the sport bar).
Step Four
Step Four
5. Using the provided #40 Torx head driver and
ratchet, tighten the Torx screws by turning
them clockwise. Secure them until they are
snug (refer to the following table for
recommended torque specifications), being
careful not to cross-thread the screws or
overtighten. Repeat on the opposite side.
Step Five
Torque
Specification
For Torx Screw
Maximum Minimum
119.5 in-lb 150.5 in-lb 106.2 in-lb
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Failure to follow the next steps could result in
damage to the Soft Top or vehicle.
1 — Lock Position
2 — Torx Head Screw
3 — Torx Head Screw
Torque
Specification
For Torx
Screws
Maximum Minimum
119.5 in-lb 150.5 in-lb 106.2 in-lb
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Do not overtighten the screws. You can strip the
screws if they are overtightened.
22_JL_OM_EN_USC_t.book Page 92
Loading ...
Loading ...
Loading ...