Loading ...
Loading ...
Loading ...
30 GETTING TO KNOW YOUR VEHICLE
To remove the front doors, proceed as follows:
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin screws from the upper
and lower outside hinges (using a #T50 Torx
head driver).
NOTE:
The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear load
floor.
Hinge Pin Screw
3. Remove the plastic wiring access door under
the instrument panel by sliding the plastic
panel along the door frame toward the seats
until the tabs are detached.
Wiring Access Door
NOTE:
Do not force open; this will break the plastic cover.
4. Pull up on the red locking tab to unlock the
wiring harness.
Closed Wiring Harness
5. Push and hold down the black security tab
under the wiring harness, and lift the harness
lever into the open position.
Open Wiring Harness
6. With the wiring harness open, pull straight
downward on the wiring connector to unplug.
Store the wiring connector in the lower door
basket.
1 – Red Locking Tab
2 – Wiring Harness Lever
1 – Wiring Harness Lever (Open Position)
2 – Black Security Tab
22_JL_OM_EN_USC_t.book Page 30
Loading ...
Loading ...
Loading ...