Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 335
(Continued)
SPARE TIRE REMOVAL
1. To remove the spare tire from the carrier,
remove the tire cover, if equipped.
2. Remove the Rear Camera Cover by turning the
lock bolt counterclockwise with the #T40 torx
head driver and ratchet from the supplied tool
kit.
Unlock Rear Camera Cover
3. Remove the lug nuts with the lug wrench
turning them counterclockwise. If equipped,
remove the locking lug nut with the lock key
(located in the glove box) turning it counter-
clockwise.
Removing The Spare Tire
JACKING INSTRUCTIONS
WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from
the edge of the roadway as possible before
raising the vehicle.
Turn on the Hazard Warning Flashers.
Apply the parking brake firmly and shift an
automatic transmission in PARK; a manual
transmission to REVERSE.
Block the wheel diagonally opposite the wheel
to be raised.
Never start or run the engine with the vehicle
on a jack.
Do not let anyone sit in the vehicle when it is
on a jack.
Do not get under the vehicle when it is on a
jack. If you need to get under a raised vehicle,
take it to a service center where it can be
raised on a lift.
Only use the jack in the positions indicated
and for lifting this vehicle during a tire change.
If working on or near a roadway, be extremely
careful of motor traffic.
To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with
the valve stem facing the ground.
WARNING!
7
22_JL_OM_EN_USC_t.book Page 335
Loading ...
Loading ...
Loading ...