Loading ...
Loading ...
Loading ...
108 GETTING TO KNOW YOUR VEHICLE
3. Swing the frame bracket around the side of the
rail, and insert the screws from underneath.
Tighten with #40 Torx head driver until they
are snug, being careful not to cross-thread the
screws or overtighten. Refer to the following
table for the appropriate torque specifications
for the door rail screws.
Step Three
4. Set the rear door frame pin into the hole on top
of the body side, just behind the rear door
opening.
Step Four
5. Carefully position the top of the door frame
onto the rear of the front door rail, making sure
rubber seals lie flat. Ensure the seals are
installed correctly to avoid water leaks.
Position Of Frame Above Door
Target Torque
Specification
For Torx
Fasteners
Maximum Minimum
79.6 in-lb
(9 N·m)
87.6 in-lb
(9.9 N·m)
71.7 in-lb
(8.1 N·m)
CAUTION!
Do not overtighten the screws. You can strip the
screws if they are overtightened.
1 — Front Door Rail
2 — Rear Door Frame
22_JL_OM_EN_USC_t.book Page 108
Loading ...
Loading ...
Loading ...