Loading ...
Loading ...
Loading ...
102 GETTING TO KNOW YOUR VEHICLE
3. From the front of the Sunrider® top, lift and
push the top rearward to the Sunrider®
position.
Sunrider® Position
4. Secure the top by using the two hook-and-loop
fasteners provided with the Sunrider® kit, and
wrap one around the side rails on each side of
the Sunrider® top to hold it in place.
Hook-And-Loop Fastener Placement
POWER SLIDING TOP — IF EQUIPPED
If your vehicle is equipped with a Power Sliding
Top, the control switch can be found on the front
trim panel, to the right of the driver’s side sun visor.
Power Sliding Top Control Switch
NOTE:
The power top is non-removable. If desired, the
rear quarter windows can be removed and
stored in the provided storage bag Ú page 104.
The power top will not open in temperatures
below -4°F (-20°C). However, if it is opened at a
higher temperature, it can be closed at
temperatures above -40°F (-40°C).
The power top will not operate at vehicle speeds
above 60 mph (96 km/h).
CAUTION!
Lowering of the windshield is NOT
recommended in vehicles equipped with a
Power Sliding Top. Damage will occur to the top
as well as the header seal.
1 — Open Switch
2 — Close Switch
22_JL_OM_EN_USC_t.book Page 102
Loading ...
Loading ...
Loading ...