Loading ...
Loading ...
Loading ...
100 GETTING TO KNOW YOUR VEHICLE
Sunrider® For Hard Top
To install the Sunrider® soft top, proceed as
follows:
1. Remove both front Hard Top Freedom panels
Ú
page 93.
2. With the help of a second person, set the
Sunrider® top onto the top of the vehicle
making sure to align the holes at the front and
rear of the side rails.
Lower Sunrider® Onto The Vehicle
3. Swing the front frame bracket around the side
of the rail, and insert the door rail attachment
bolt (provided bolt without spacer) from
underneath. Tighten with a #40 Torx head
driver until snug.
Attach Front Door Rail Bolt
4. Insert the rear door rail attachment bolt
(provided bolt with spacer) from underneath.
Tighten with #40 Torx head driver until snug.
Attach Rear Door Rail Bolt
5. Repeat steps 3 and 4 on the other side of the
vehicle.
NOTE:
The recommended torque specification for the
front and rear door rail attachment bolts is 8.8 ft-lb
(12 N·m).
22_JL_OM_EN_USC_t.book Page 100
Loading ...
Loading ...
Loading ...