Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 111
5. Using the provided #40 Torx head driver,
remove the four Torx screws located along the
interior of the windshield.
Step Five
NOTE:
Store all of the mounting bolts in their original
threaded holes and tighten for safekeeping.
6. Lower the windshield gently until it contacts
the tie-down bumpers (if equipped).
Step Six
7. Secure the windshield by passing a cinch strap
through the tie-down on either side of the hood
and on the windshield frame. Tighten the strap
to secure the windshield in place.
Adaptive Cruise Control (ACC)/Forward
Collision Warning (FCW) Sensor Protective
Cover — If Equipped
Your vehicle may be equipped with a protective
cover that is to be used whenever the windshield is
folded down in order to protect the Adaptive Cruise
Control (ACC)/Forward Collision Warning (FCW)
sensor. To install the cover, follow these
instructions:
1. Secure the top part of the cover so that it
hinges to the header.
2. Swing the cover down and push on it so that it
covers the opening.
3. Check to make sure the cover is secured
properly.
NOTE:
Be sure to remove the cover before returning the
windshield to the normal position. Store the cover
in the cargo area.
Cleaning Instructions
During windshield down applications, dust/dirt can
accumulate in the cover and block the camera
lens. Use a microfiber cloth to clean the camera
lens, module, and inside cover, being careful not to
damage or scratch the module.
1 — Outside Torx Screws
2 — Inside Torx Screws
1 — Washer Nozzle
2 — Bumper
3 — Tie-Down
CAUTION!
Do Not Overtighten! Damage to the windshield
could result.
2
22_JL_OM_EN_USC_t.book Page 111
Loading ...
Loading ...
Loading ...