Loading ...
Loading ...
Loading ...
72 GETTING TO KNOW YOUR VEHICLE
3. Swing the frame bracket around the side of
the rail, and insert the screws from under-
neath. Tighten with #40 Torx head driver
until they are snug, being careful not to
cross-thread the screws or overtighten.
Refer to the table below for the appropriate
torque specifications for the door rail
screws.
Step Three
4. Set the rear door frame pin into the hole on
top of the body side, just behind the rear
door opening.
Step Four
5. Carefully position the top of the door frame
onto the rear of the front door rail, making
sure rubber seals lay flat. Ensure the seals
are installed correctly to avoid water leaks.
Position Of Frame Above Door
Torque
Specification
For Torx
Screws
Maximum Minimum
8.8 in-lbs 11.0 in-lbs 6.6 in-lbs
12 N·m 15 N·m 9 N·m
CAUTION!
Do not overtighten the screws. You can strip
the screws if they are overtightened.
1 — Front Door Rail
2 — Rear Door Frame
20_JL_OM_EN_USC_t.book Page 72
Loading ...
Loading ...
Loading ...