Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 29
(Continued)
5. Push and hold down the black security tab
under the wiring harness, and lift the
harness into the open position.
Open Wiring Harness
6. With the wiring harness open, pull down-
ward on the wiring connector to unplug.
Store the wiring connector in the lower door
basket.
7. Remove the check screw from the center
door check (using a #T40 Torx head driver).
Door Check (Detached)
8. With the door open, lift the door with the
help of another person, to clear the hinge
pins from their hinges and remove the door.
To reinstall the door(s), perform the previous
steps in the reverse order.
NOTE:
The upper hinge has a longer pin, which can be
used to assist in guiding the door into place
when reinstalling.
Rear Door Removal (Four-Door Models)
Door Removal Warning Label
1 – Wiring Harness
2 – Security Tab
WARNING!
Do not drive your vehicle on public roads with
the doors removed as you will lose the
protection they can provide. This procedure is
furnished for use during off-road operation
only.
WARNING!
All occupants must wear seat belts during
off-road operation with doors removed.
Refer to “Off-Road Driving Tips” in “Starting
And Operating” for further information.
2
20_JL_OM_EN_USC_t.book Page 29
Loading ...
Loading ...
Loading ...