User Manual - Page 141

For 2020 Wrangler.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 139
4WD Low Indicator Light — If Equipped
This light alerts the driver that the
vehicle is in the four-wheel drive LOW
mode. The front and rear driveshafts
are mechanically locked together
forcing the front and rear wheels to rotate at the
same speed. Low range provides a greater gear
reduction ratio to provide increased torque at
the wheels.
4WD Part Time Indicator Light — If Equipped
This light alerts the driver that the
vehicle is in the four-wheel drive part
time mode, and the front and rear
driveshafts are mechanically locked
together forcing the front and rear wheels to
rotate at the same speed.
Active Speed Limiter Fault Indicator Light If
Equipped
This warning light will illuminate to
signal when there is a fault detected
with the Active Speed Limiter.
Axle Locker Fault Indicator Light
This light indicates when the front
and/or rear axle locker fault has been
detected.
Forward Collision Warning Off Indicator Light
— If Equipped
This indicator light illuminates to indi-
cate that Forward Collision Warning is
off.
Front And Rear Axle Lock Indicator Light
This light indicates when the front,
rear, or both axles have been locked.
The telltale will display the lock icon
on the front and rear axles to indicate
the current lock status.
Neutral Indicator Light — If Equipped
This light alerts the driver that the
vehicle is in the neutral mode.
Rear Axle Lock Indicator Light
This light indicates when the rear axle
lock has been activated.
Service Adaptive Cruise Control Warning
Light — If Equipped
This light will turn on when a ACC is
not operating and needs service.
Refer to “Adaptive Cruise Control
(ACC)” in “Starting And Operating” for further
information.
Sway Bar Indicator Light — If Equipped
This indicator light will illuminate
when the front sway bar is discon-
nected.
Green Indicator Lights
Adaptive Cruise Control (ACC) Set With No
Target Detected Indicator Light — If Equipped
This light will turn on when the Adaptive
Cruise Control is set and there is no
target vehicle detected. Refer to “Adap-
tive Cruise Control (ACC)” in “Starting
And Operating” for further information.
Adaptive Cruise Control (ACC) Set With Target
Light — If Equipped
This will display when the ACC is set
and a target vehicle is detected. Refer
to “Adaptive Cruise Control (ACC) — If
Equipped” in “Starting And Operating”
for further information.
3
20_JL_OM_EN_USC_t.book Page 139
Loading ...
Loading ...
Loading ...