Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 267
failure to operate this vehicle correctly may
result in loss of control or vehicle rollover.
Off-Road Driving Tips
Side Step Removal — If Equipped
NOTE:
Prior to off-road usage, the side steps should be
removed to prevent damage if so equipped.
1. Remove both nuts and bolt from the under-
side of the vehicle for each bracket.
Underside Nuts
2. Remove the side step assembly.
Bumper End Cap Removal
The end caps on your vehicle’s front bumper
can be removed by following the steps below:
NOTE:
Bumper end caps are removable on steel
bumper only.
1. Loosen the two bolts that retain the GAWR
bracket (Bolts #1 and #2) to the end cap
using a T45 torx bit screw driver. Do not
remove the bolts.
Bolt #1
Bolt #2
2. Remove the remaining 8 bolts.
3. Gently remove the end cap from the vehicle
and store it where it will not get damaged.
4. Repeat this procedure on the other side.
The Basics Of Off-Road Driving
You will encounter many types of terrain driving
off-road. You should be familiar with the terrain
and area before proceeding. There are many
types of surface conditions: hard-packed dirt,
gravel, rocks, grass, sand, mud, snow and ice.
Every surface has a different effect on your
vehicle's steering, handling and traction.
Controlling your vehicle is one of the keys to
successful off-road driving, so always keep a
firm grip on the steering wheel and maintain a
5
20_JL_OM_EN_USC_t.book Page 267
Loading ...
Loading ...
Loading ...