Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 35
Fold And Tumble Rear Seat — Two Door
Models
NOTE:
Prior to folding the rear seat, it may be neces-
sary to reposition the front seats.
Be sure that the front seats are fully upright
and positioned forward. This will allow the
rear seat to fold down easily.
Folding The Rear Seat
1. Lift the seatback release lever and fold the
seatback forward.
Rear Seatback Release Lever
2. Slowly flip the entire seat forward.
Using The Retention Straps
1. There are two retention straps located on
the back of the rear seat and two corre-
sponding wire loops located on the back of
each B-pillar. Open the hook-and-loop
fastener on the strap and thread through
the wire loop. Fold the hook-and-loop
fastener over to keep the seat in the folded
position. This should be done on both
sides.
Rear Seat Tumble Position Retention Strap
2. To return the seat to its normal upright posi-
tion, reverse these steps.
WARNING!
Be certain that the seatback is securely
locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.
2
20_JL_OM_EN_USC_t.book Page 35
Loading ...
Loading ...
Loading ...