Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 107
5. Using the provided #40 Torx head driver,
remove the four Torx screws located along
the interior of the windshield.
Interior Torx Screw Locations
NOTE:
Store all of the mounting bolts in their original
threaded holes and tighten for safekeeping.
6. Lower the windshield gently until it contacts
the footman loop bumpers (if equipped).
Footman Loop Bumpers
7. Secure the windshield by passing a cinch
strap through the footman loops on either
side of the hood and on the windshield
frame. Tighten the strap to secure the wind-
shield in place.
ACC/FCW Sensor Protective Cover — If
Equipped
Your vehicle may be equipped with a protective
cover that is to be used whenever the wind-
shield is folded down in order to protect the
ACC/FCW sensor. To install the cover, follow the
instructions below:
1. Secure the top part of the cover so that it
hinges to the header.
2. Swing the cover down and push on it so that
it covers the opening.
3. Check to make sure the cover is secured
properly.
1 — Washer Nozzle
2 — Bumper
3 — Footman Loop
CAUTION!
Do Not Overtighten! Damage to the
windshield could result.
2
20_JL_OM_EN_USC_t.book Page 107
Loading ...
Loading ...
Loading ...