User Manual - Page 35

For 2020 Wrangler.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 33
(Continued)
Heated Seats — If Equipped
The heated seats control buttons are located on
the center instrument panel below the touch-
screen, and are also located within the climate
or controls screen of the touchscreen.
Heated Seat Buttons
Push the heated seat button once to turn
the HI setting on.
Push the heated seat button a second
time to turn the MED setting on.
Push the heated seat button a third time
to turn the LO setting on.
Push the heated seat button a fourth time
to turn the heating elements off.
NOTE:
The engine must be running for the heated
seats to operate.
The level of heat selected will stay on until
the operator changes it.
Vehicles Equipped With Remote Start
On models that are equipped with remote start,
the driver’s seat can be programmed to come
on during a remote start.
This feature can be programmed through the
Uconnect system. Refer to “Uconnect Settings”
in “Multimedia” for further information.
Front Passenger Easy Entry Seat Two Door
Models
Pull upward on the easy entry lever located on
the outboard side of the seat back, and slide
the entire seat forward.
Easy Entry Lever
WARNING!
Persons who are unable to feel pain to the
skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medica-
tion, alcohol use, exhaustion or other phys-
ical condition must exercise care when
using the seat heater. It may cause burns
even at low temperatures, especially if
used for long periods of time.
Do not place anything on the seat or seat-
back that insulates against heat, such as a
blanket or cushion. This may cause the seat
heater to overheat. Sitting in a seat that has
been overheated could cause serious
burns due to the increased surface
temperature of the seat.
WARNING! (Continued)
2
20_JL_OM_EN_USC_t.book Page 33
Loading ...
Loading ...
Loading ...