Loading ...
Loading ...
Loading ...
MULTIMEDIA 397
Safety & Driving Assistance
After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:
Setting Name Selectable Options
Forward Collision Warning — If Equipped Off Warning Only Warning & Braking
NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will remain off when the vehicle is restarted.
FCW includes Advanced Brake Assist (ABA). The ABA applies additional brake pressure when the driver requests insufficient brake pressure to avoid
a potential frontal collision. When the “Warning Only” option is selected, a chime sounds alerting you of a possible collision with the vehicle in front
of you and more brake pressure is needed. When the “Warning and Brake” option is selected, it applies the brakes to slow your vehicle in case of
potential forward collision and sounds an audible chime to alert you.
Forward Collision Warning Sensitivity — If Equipped Near Med Far
NOTE:
Sets the distance in which a Forward Collision Warning occurs.
ParkSense — If Equipped Sound Only Sound & Display
Rear ParkSense Volume Low Medium High
Blind Spot Alert — If Equipped Off Lights Lights & Chime
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become
misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned will result in the BSM not operating to
specification.
Hill Start Assist On Off
9
20_JL_OM_EN_USC_t.book Page 397
Loading ...
Loading ...
Loading ...