Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 67
2. Unfold the black panel divider (ensure the
divider is laying flat).
Fold Divider Over Left Panel
3. Insert the right side Freedom Top panel into
the bag with the latches facing downward.
Right Panel — Latches Facing Downward
NOTE:
Ensure the front Freedom Top panel latch is
closed prior to inserting the panel into the bag.
4. Unfold the outer flap and zip the Freedom
Top bag closed.
Storage Bag Closed
5. Lift the Freedom Top bag into the vehicle
with the hooks and straps facing the back of
the rear seat. Attach the clip at the bottom
of the bag to the child restraint anchorage,
located at the base of the rear seat.
6. Wrap the upper strap around the rear head
restraints and loop the strap through the
buckle. Pull on the strap to tighten the
Freedom Top bag securely against the rear
seat.
Front Panel(s) Installation
1. Set the right side panel on the windshield
frame with the locating pin in the front
receiver mounting hole followed by the left
side panel, making sure there is no over-
hang. Also, make sure that the panels are
sitting flush with the body.
2. Reinstall the panel(s) using the same steps
for removal in reverse order.
NOTE:
To prevent water leaks, the seals and Freedom
Top Panels should be clear of any dust and
debris prior to re-installation.
Rear Hard Top Removal
1. Remove both front panels. Refer to “Front
Panel(s) Removal” in this section.
2. Open both doors.
2
20_JL_OM_EN_USC_t.book Page 67
Loading ...
Loading ...
Loading ...