Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 119
Auxiliary Switches — If Equipped
Four auxiliary switches located in the lower
switch bank of the instrument panel can be
used to power various electrical devices. You
have the ability to configure the functionality of
the auxiliary switches via the Uconnect settings.
All switches can be configured as follows:
Switch type operation: Latching or
Momentary
Power source: Battery or Ignition
Ability to hold last state across key cycles:
On or Off
Auxiliary Switches
NOTE:
Holding last state conditions are met when
switch type is set to latching and power source
is set to ignition.
For more information, refer to “Uconnect
Settings” in “Multimedia”.
The auxiliary switches manage the relays that
power four blunt cut wires. These wires are
located under the instrument panel in the
passenger compartment and under the hood to
the right, near the battery.
Auxiliary Switch Connections – Under Hood
Auxiliary Switch Connections – Under Instrument Panel
In addition to the four auxiliary switch wires, a
fused battery wire and ignition wire are also
located in the interior, in the passenger side under
the instrument panel.
A kit of splices and heat shrink tubing are provided
with the auxiliary switches to aid in the connection/
installation of your electrical devices.
WARNING!
To avoid serious injury or death:
Do not insert any objects into the
receptacles.
Do not touch with wet hands.
Close the lid when not in use.
If this outlet is mishandled, it may cause an
electric shock and failure.
2
20_JL_OM_EN_USC_t.book Page 119
Loading ...
Loading ...
Loading ...