Loading ...
Loading ...
Loading ...
140 GETTING TO KNOW YOUR INSTRUMENT PANEL
4WD Auto Indicator Light — If Equipped
This light alerts the driver that the
vehicle is in the four-wheel drive auto
mode. The system will provide power
to all four wheels and shift the power
between the front and rear axles as needed.
This will provide maximum traction in dry and
slippery conditions.
Cruise Control SET Indicator Light — If
Equipped With A Premium Instrument
Cluster
This indicator light will illuminate
when the speed control is set to the
desired speed. Refer to “Speed
Control — If Equipped” in “Starting
And Operating” for further information.
Front Fog Indicator Light — If Equipped
This indicator light will illuminate
when the front fog lights are on.
Park/Headlight On Indicator Light
This indicator light will illuminate
when the park lights or headlights are
turned on.
Stop/Start Active Indicator Light — If
Equipped
This indicator light will illuminate
when the Stop/Start function is in
“Autostop” mode.
Turn Signal Indicator Lights
When the left or right turn signal is
activated, the turn signal indicator will
flash independently and the corre-
sponding exterior turn signal lamps
will flash. Turn signals can be activated when
the multifunction lever is moved down (left) or
up (right).
NOTE:
A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.
White Indicator Lights
Adaptive Cruise Control (ACC) Ready Light —
If Equipped
This light will turn on when the vehicle
equipped with Adaptive Cruise
Control (ACC) has been turned on, but
not set. Refer to “Adaptive Cruise
Control (ACC) — If Equipped” in “Starting And
Operating” for further information.
2WD High Indicator Light — If Equipped With
a Premium Cluster
This light alerts the driver that the
vehicle is in the two wheel drive high
mode.
Hill Descent Control (HDC) Indicator Light — If
Equipped
This indicator shows when the Hill
Descent Control (HDC) feature is
turned on. The lamp will be on solid
when HDC is armed. HDC can only be
armed when the transfer case is in the “4WD
LOW” position and the vehicle speed is less
then 30 mph (48 km/h). If these conditions are
not met while attempting to use the HDC
feature, the HDC indicator light will flash on/off.
20_JL_OM_EN_USC_t.book Page 140
Loading ...
Loading ...
Loading ...