Loading ...
Loading ...
Loading ...
228 STARTING AND OPERATING
Secondary Battery
Your vehicle may be equipped with a secondary
battery used to power the Stop/Start system
and the 12 Volt vehicle electrical system. The
secondary battery is located behind the wheel
well for the front passenger wheel.
Battery Locations
Automatic Mode
The Stop/Start feature is enabled
after every normal customer engine
start. At that time, the system will go
into STOP/START READY and if all
other conditions are met, can go into a STOP/
START AUTOSTOP ACTIVE “Autostop” mode.
To Activate The Autostop Mode, The Following
Must Occur:
The system must be in STOP/START READY
state. A STOP/START READY message will be
displayed in the instrument cluster display
within the Stop/Start section. Refer to
“Instrument Cluster” in “Getting To Know
Your Instrument Panel” for further informa-
tion.
The vehicle must be completely stopped.
The shifter must be in a forward gear and the
brake pedal depressed.
The engine will shut down, the tachometer will
move to the zero position and the Stop/Start
telltale will illuminate indicating you are in
Autostop. Customer settings will be maintained
upon return to an engine running condition.
1 — Primary Battery
2 — Secondary Battery
WARNING!
Vehicles with the Stop/Start system will be
equipped with two batteries. Both the main
and the supplemental batteries must be
disconnected to completely de-energize the
12 Volt electrical system.
Serious injury or death could result if you do
not disconnect both batteries. To learn how
to properly disconnect, see your authorized
dealer.
20_JL_OM_EN_USC_t.book Page 228
Loading ...
Loading ...
Loading ...