Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 233
To Manually Turn Off The Stop/Start System
1. Push the Stop/Start OFF switch (located on
the switch bank). The light on the switch
will illuminate.
Stop/Start OFF Switch
2. The STOP/START OFF message will appear in
the instrument cluster. Refer to “Instrument
Cluster Display” in “Getting To Know Your
Instrument Panel” for further information.
3. At the next vehicle stop (after turning off the
Stop/Start system), the engine will not be
stopped.
4. If the Stop/Start system is manually turned
off, the engine can only be started and
stopped by cycling the ignition switch.
5. The Stop/Start system will reset itself back
to an ON condition every time the ignition is
turned off and back on.
To Manually Turn On The Stop/Start System
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will turn
off.
System Malfunction
If there is a malfunction in the Stop/Start
system, the system will not shut down the
engine. A “SERVICE STOP/START SYSTEM”
message will appear in the instrument cluster
display. Refer to “Instrument Cluster Display“ in
“Getting to Know Your Instrument Panel” for
further information.
If the “SERVICE STOP/START SYSTEM”
message appears in the instrument cluster
display, have the system checked by an autho-
rized dealer.
SPEED CONTROL — IF EQUIPPED
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
20 mph (32 km/h).
The Speed Control buttons are located on the
right side of the steering wheel.
Speed Control Buttons
1 — SET (+)/Accel
2 — On/Off
3 — RES/Resume
4 — SET (-)/Decel
5 — CANC/Cancel
5
20_JL_OM_EN_USC_t.book Page 233
Loading ...
Loading ...
Loading ...