Loading ...
Loading ...
Loading ...
58
Using an Electronic Viewnder (Sold Separately)
z
The viewnder display and camera screen cannot be activated at the same
time.
z
Touch operations on the camera screen are not possible while the viewnder
display is in use.
z
Although the viewnder is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specications, in rare cases some pixels may be defective or may appear as
red or black dots. This does not indicate camera damage or affect recorded
images.
z
Some aspect ratio settings (
=
127) will cause black bars to be displayed on
the top and bottom or left and right edges of the screen. These areas will not
be recorded.
z
You can switch between viewnder and screen display by pressing the
viewnder’s <
> button.
z
The screen is not activated when you move your eye away from the viewnder
with [Manual display] set to [Viewnder] after you have selected [
5
: Display
settings] and set [Display control] to [Manual], so press the viewnder’s
<
> button to activate the screen.
z
Display of shooting information is not adjusted when you hold the camera
vertically with [VF vertical display] set to [Off] after you have selected [
5
:
Shooting info. disp.].
z
You can congure display brightness (
=
498) for the viewnder and camera
screen separately.
z
To reduce the shooting screen, set [
5
: VF display format] to [Display 2].
z
Angular adjustment is not possible with EVF-DC2.
Loading ...
Loading ...
Loading ...