Loading ...
Loading ...
Loading ...
556
In-Camera Charging
Using USB Power Adapter PD-E1 (sold separately), you can charge Battery
Pack LP-E17 without removing it from the camera. Charging stops if you
operate the camera.
1
Connect the USB power adapter.
z
With the camera’s power switch set to
<
2
>, insert the USB power adapter
plug fully into the digital terminal.
2
Connect the power cord.
z
Connect the power cord to the USB
power adapter and plug the other end
into a power outlet.
z
Charging begins, and the access lamp
(1) is lit in orange.
(
1
)
z
When charging is nished, the access
lamp turns off. Unplug the power cord
and disconnect the USB power adapter
from the camera.
z
To protect batteries and keep them in optimal condition, do not charge
continuously for more than 24 hours.
z
In case of charging problems, the access lamp blinks in orange and a
protective circuit stops charging. In this case, unplug the power cord, reattach
the battery, and wait a few minutes before plugging it in again. If the problem
persists, contact your dealer or nearest Canon Service Center.
Loading ...
Loading ...
Loading ...