Loading ...
Loading ...
Loading ...
563
Troubleshooting Guide
The maximum burst during continuous shooting is lower.
z
If you shoot a subject that has ne detail such as a eld of grass, the le
size will be larger, and the actual maximum burst may be lower than the
number listed on
=
579.
Even after I change the card, the maximum burst displayed for
continuous shooting does not change.
z
The maximum burst displayed does not change when you switch cards,
even if you switch to a high-speed card. The maximum burst shown in
the table on
=
579 is based on Canon’s testing card. (The faster the
card’s writing speed, the higher the actual maximum burst will be.) For
this reason, the maximum burst displayed may differ from the actual
maximum burst.
Even if I set a decreased exposure compensation, the image
comes out bright.
z
Set [
z
: Auto Lighting Optimizer] to [Disable] (
=
151). When [Low],
[Standard], or [High] is set, even if you set a decreased exposure
compensation or ash exposure compensation, the image may come out
bright.
I cannot set the exposure compensation when both manual
exposure and ISO Auto are set.
z
See
=
113 to set the exposure compensation.
The image ickers or horizontal stripes appear during shooting.
z
Horizontal banding noise may appear in still photos or movies recorded
at high ISO speeds with an EF-M 18-55mm f/3.5-5.6 IS STM lens
attached.
If horizontal banding noise occurs, either lower the ISO speed or set a
lower maximum limit for ISO Auto.
Loading ...
Loading ...
Loading ...