Loading ...
Loading ...
Loading ...
Appendix
86
En
MirrorLink
Message Cause Action
The application list
could not be read out.
Failed to load the applica-
tion list.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
There is no supported
application on your
MirrorLink device.
No supported applications
can be found.
Install MirrorLink compliant appli-
cations to your MirrorLink device.
Communication error
occurred.
There was a communica-
tion error.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Launching the applica-
tion failed.
Failed to launch the
application.
Try again.
Failed to display the
screen of your device
because of irregular
resolution.
The image size is too large.
The size of the images transferred
from the device exceeds 800 × 480.
If your MirrorLink
device is locked,
please unlock it when
it is safe and lawful for
you to do so.
The MirrorLink device is
locked.
Unlock the MirrorLink device.
Handling and care of discs
Some basic precautions are necessary when
handling your discs.
■ Built-in drive and care
Use only conventional, fully circular
discs. Do not use shaped discs.
Do not use cracked, chipped, warped, or
otherwise damaged discs as they may
damage the built-in drive.
Use 12-cm discs. Do not use 8-cm discs
or an adapter for 8-cm discs.
When using discs that can be printed
on label surfaces, check the instruc-
tions and the warnings of the discs.
Depending on the discs, inserting and
ejecting may not be possible. Using
such discs may result in damage to this
equipment.
Do not attach labels, write on or apply
chemicals to the surface of the discs.
Do not attach commercially available
labels or other materials to the discs.
Condensation may temporarily impair
the built-in drive’s performance.
Playback of discs may not be possible
because of disc characteristics, disc
format, recorded application, playback
environment, storage conditions and so
on.
Road shocks may interrupt disc
playback.
Read the precautions for discs before
using them.
■ Ambient conditions for playing
a disc
At extremely high temperatures, a tem-
perature cutout protects this product by
switching it off automatically.
Despite our careful design of the prod-
uct, small scratches that do not affect
actual operation may appear on the disc
surface as a result of mechanical wear,
ambient conditions for use or handling
of the disc. This is not a sign of the
malfunction of this product. Consider it
to be normal wear and tear.
Playable discs
■ DVD-Video and CD
DVD-Video
CD
p is a trademark of DVD Format/Logo
Licensing Corporation.
p It is not possible to play DVD-Audio
discs. This DVD drive may not be able to
play all discs bearing the marks shown
above.
■ AVCHD recorded discs
This unit is not compatible with discs
recorded in AVCHD (Advanced Video Codec
High Definition) format. Do not insert
AVCHD discs. If inserted, the disc may not
be ejected.
■ Playing DualDisc
DualDiscs are two-sided discs that have
a recordable CD for audio on one side
and a recordable DVD for video on the
other.
Playback of the DVD side is possible with
this product. However, since the CD side
of DualDiscs is not physically compatible
with the general CD standard, it may not
be possible to play the CD side with this
product.
Frequent loading and ejecting of a
DualDisc may result in scratches to the
disc.
Loading ...
Loading ...
Loading ...