Loading ...
Loading ...
Loading ...
English
Appendix
85
En
Message Cause Action
Reference
USB1 was discon-
nected for device
protection. Do not
re-insert this USB
memory into the unit.
Press reset to restart
USB memory.
USB2 was discon-
nected for device
protection. Do not
re-insert this USB
memory into the unit.
Press reset to restart
USB memory.
The USB connector or USB
cable is short-circuited.
Check that the USB connector or
USB cable is not caught in some-
thing or damaged.
The connected USB stor-
age device consumes more
than maximum allowable
current.
Disconnect the USB storage device
and do not use it. Turn the ignition
switch to OFF, then to ACC or ON
and then connect a compliant USB
storage device.
The USB interface cable
for iPod / iPhone is
short-circuited.
Confirm that the USB interface
cable for iPod / iPhone or USB
cable is not caught in something or
damaged.
Audio Format not
supported
This type of file is not sup-
ported on this product.
Select a file that can be played.
page 88, page 93
iPod
Message Cause Action
Error-02-6X/-9X/-DX iPod failure.
Disconnect the cable from the
iPod. Once the iPod’s main menu
is displayed, reconnect the iPod
and reset it.
Error-02-67
The iPod firmware version
is old.
Update the iPod version.
iTunes tagging
Message Cause Action
Error-8D
Built-in FLASH ROM
encountered an error.
Turn the ignition switch to OFF and
then to ON.
Tag store failed.
Tag information cannot be
stored in this product.
Try again.
Already stored.
This tag information is
already stored in memory.
Tag information can only be saved
once for any given song. Tag infor-
mation cannot be saved for the
same song more than once.
Memory full. Connect
iPod.
The tag information is suc-
cessfully stored. The flash
memory of this product has
become full.
The tag information on this product
is transferred to the iPod automati-
cally when an iPod is connected.
Memory full. Tags not
stored. Connect iPod.
This product’s flash mem-
ory used as the temporary
storage area is full.
The tag information on this product
is transferred to the iPod automati-
cally when an iPod is connected.
iPod full. Tags not
transferred.
Memory used for tag infor-
mation on the iPod is full.
Synchronize the iPod with iTunes
and clean up the tagged playlist.
Message Cause Action
Tag transfer failed.
Reconnect your iPod.
This product’s tag infor-
mation cannot transfer to
the iPod.
Check the iPod and try again.
Bluetooth
Message Cause Action
Error-10
The power failed for the
Bluetooth module of this
product.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Android Auto
Message Cause Action
Reference
Android Auto has
stopped.
The connected device
is not compatible with
Android Auto.
Check if the device is compatible
with Android Auto.
The startup of Android
Auto failed for some
reasons.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Restart the smartphone.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
The time set in this product
is not correct.
Check if the time is correctly set.
Bluetooth pairing
failed. Please pair
your Android phone
manually.
The Bluetooth pairing failed
for some reasons.
Pair this product with the device
manually.
page 14, page 15
Loading ...
Loading ...
Loading ...