Loading ...
Loading ...
Loading ...
Connecting to External Devices
Note:
•
If your remote control fails to pair with TV, check the Bluetooth is set On by pressing button to select
Settings > Remotes & Accessories > Bluetooth to On.
• This function may not be applicable in some models/countries/regions.
• If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
• If an error occurred with the remote control while using sufficiently charged batteries, you can take out the
batteries for 1~2 seconds then insert them back again. Now the remote control will work normally.
• The remote control cannot be paired to the TV while the TV is in standby mode.
Use HDMI&CEC
Use the TV's remote to control external devices that are connected to the TV by an HDMI cable. The external
devices need to support HDMI&CEC function.
Connecting an external device through HDMI&CEC function
Press button to select Settings > Channels & Inputs > Inputs > HDMI control.
1. Set HDMI control to On.
2. Connect an HDMI&CEC compliant device to the TV.
3. Turn on the connected external device. The device is automatically connected to the TV. After connection
is finished, you can access the menu of the connected device on your TV screen using your TV remote
control and control the device.
Enabling device auto power off
Press button to select Settings > Channels & Inputs > Inputs > Device auto power off.
Set to On to turn off CEC compatible external devices when the TV is turned off.
Enabling Serial/IP Control Port
Establish communication with PC through LAN or serial port on the TV, you can input commands on PC to
control the TV, such as turn on/off the TV, select an input source or adjust the OSD menu , etc.
Press button to select Settings > Channels & Inputs > Inputs > Serial/IP Control Port .
When set to On, the serial/IP control port can be used.
This function may not be applicable in some models/countries/regions.
Enabling TV auto power on
Press button to select Settings > Channels & Inputs > Inputs > TV auto power on.
Set to On to turn on the TV when CEC compatible external devices is turned on.
This function may not be applicable in some models/countries/regions.
HDMI format function
In HDMI source, press / button to select HDMI Format.
22
Loading ...
Loading ...
Loading ...