Loading ...
Loading ...
Loading ...
RIGOL Chapter 11 Protocol Decoding
11-20 MSO7000/DS7000 User Guide
➢ Press CS and rotate the multifunction knob to select the desired
channel, and then press down the knob to select it. You can also press
CS continuously or enable the touch screen to select it. The analog
channel (CH1-CH4) and digital channel (D0-D15) can all be selected as
the CS channel.
➢ Press CS Polarity continuously to select (Positive) or
(Negative) as the polarity for CS channel.
➢ When you select the analog channel (CH1-CH4) as the CS channel,
press Threshold, then rotate the multifunction knob or use the
pop-up numeric keypad to set the threshold.
4
． Source setting
Press Sources to enter the source setting menu.
âš« CLK setting
➢ Press CLK and rotate the multifunction knob to select the desired
source of the clock channel, and then press down the knob to select it.
You can also press CLK continuously or enable the touch screen to
select it. The analog channel (CH1-CH4) and digital channel (D0-D15)
can all be selected.
➢ When you select the analog channel (CH1-CH4), press Threshold
below the CLK menu, then rotate the multifunction knob or use
the pop-up numeric keypad to set the threshold of the clock channel.
➢ Press Slope continuously to set the instrument to sample MISO and
MOSI on the rising edge (
) or falling edge ( ) of the clock signal.
âš« MISO and MOSI setting
➢ Press MISO and rotate the multifunction knob to select the
desired MISO data channel, and then press down the knob to select it.
You can also press MISO continuously or enable the touch screen to
select it. The available channels include OFF, analog channels
(CH1-CH4), and digital channels (D0-D15). When you select an analog
channel (CH1-CH4), press Threshold below the MISO menu, then
rotate the multifunction knob
or use the pop-up numeric keypad to
set the threshold of the MISO data channel.
➢ Press MOSI and rotate the multifunction knob to select the
desired MOSI data channel, and then press down the knob to select it.
You can also press MOSI continuously or enable the touch screen to
select it. The available channels include OFF, analog channels
(CH1-CH4), and digital channels (D0-D15). When you select an analog
channel (CH1-CH4), press Threshold below the MOSI menu, then
rotate the multifunction knob
or use the pop-up numeric keypad to
set the threshold of the MOSI data channel.
Note: MISO and MOSI source channels cannot be both set to "OFF" at
the same time.
Loading ...
Loading ...
Loading ...