Loading ...
Loading ...
Loading ...
RIGOL Chapter 11 Protocol Decoding
11-16 MSO7000/DS7000 User Guide
information includes the decoded data, the corresponding line number, time,
R/W bit, address information, and acknowledgement information.
➢ Open or close the event table: Press Event Table continuously to
enable or disable the event table. When you enable the event table,
the following figure is displayed, as shown in Figure 11-6. You can also
enable the touch screen to tap the icon
at the upper-right corner of
the table to close the event table. Besides, when the operating status is
"STOP", you can also rotate the multifunction knob
to select a
specified line and view the corresponding decoding information.
Figure 11-6 I2C Decoding Event Table
Note:
âš« When you adjust the horizontal time base, the waveform displayed
on the screen will also change, and the total number of lines
containing the decoding information in the event table will also be
changed.
âš« The displayed decoded data information in the bus is related to the
value of the horizontal time base. Reducing the horizontal time
base can help you view the detailed information.
➢ Set the event table format: Press Format, rotate the multifunction
knob
to select the display format of "Data" in the event table. Then,
press down the knob to select it. You can also press Format
continuously or enable the touch screen to select it. The available
formats include "Hex", "Dec", "Bin", and "ASCII".
➢ Set the view type: Press View, then rotate the multifunction knob
to select the form of the event table to be viewed. Press down the knob
to select it. You can also press View continuously or enable the touch
Line Number Time R/W Bit Address Decoded Data Acknowledgement
Event Table
I2C Bus
Loading ...
Loading ...
Loading ...