Loading ...
Loading ...
Loading ...
39
4.11.2.1 DTC & FFD
When this function is selected, the screen displays a list of Stored Codes and Pending
Codes. When the Freeze Frame data of certain DTCs are available for viewing, a
snowflake button will display on the right side of the DTC item. The Erase Codes function
can be applied by tapping the functional button at the bottom of the screen.
Figure 4-21 Sample DTC & FFD Screen
Current Codes
Current codes are emission-related DTCs from the ECU of the vehicle. OBDII/EOBD
Codes have a priority according to their emission severity, with higher-priority codes
overwriting lower-priority ones. The priority of the code determines the illumination
of the Malfunction Indicator Light (MIL) and the codes erase procedure.
Manufacturers rank codes differently so expect display to vary by vehicle.
Pending Codes
These are codes whose storing conditions have been met during the last drive cycle,
but need to be met on two or more consecutive drive cycles before the DTC is stored.
The purpose of displaying pending codes is to assist the service technician after a
vehicle repair when diagnostic information is cleared, by reporting test results after
a single driving cycle.
a) If a test fails during the driving cycle, the DTC associated is reported. If the
pending fault does not occur again within 40 to 80 warm-up cycles, the fault is
automatically cleared from memory.
b) Test results reported do not necessarily indicate a faulty component or system.
If test results indicate another failure after additional driving, a DTC is stored to
indicate a faulty component or system.
Freeze Frame
Loading ...
Loading ...
Loading ...