Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Unpacking the Network module

Installing the Network Management Module – 9

•

2 Installing the Network Management Module

2.1 Unpacking the Network module

The

Unable to render include or excerpt-include. Could not retrieve page.

will include the following accessories:

QuickStart

USB AM to Micro USB/M/5P 5ft Cable

2.2 Mounting the Network Module

The Network Module is hot-swappable. Inserting and/or extracting the Network Module from the communication slot of theproduct

has no effect on the output.

Remove the two screws securing the option slot cover plate and store the plate for possible future use.

Install theNetwork Module along the alignment channels in the option slot.

Secure the Network Module using the two screws.

Packing materials must be disposed of in compliance with all local regulations concerning waste.

Recycling symbols are printed on the packing materials to facilitate sorting.

It is not necessary to power down theDevice before installing the Network Module. Required tools: No. 2 Phillips

screwdriver.

If theproduct is powered up, you can verify that the Network

Module is seated properly and communicating with theproduct by

checking that the Status ON LEDflashes green after 2 minutes.

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical