Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Accessing the Network Module

Installing the Network Management Module – 10

•

2.3 Accessing the Network Module

2.3.1 Accessing the web interface through Network

2.3.1.1 Connecting the network cable

Connect a standard

gigabit compatible shielded ethernetcable (F/UTP or F/FTP)

between the network connector on theNetwork Module and a

network jack.

2.3.1.2 Accessing the web interface

STEP 1 –On a network computer, launch a supported web browser. The browser window appears.

STEP 2 –In the Address/Location field, enterhttps://

[IPaddress]

with the static IP address of the Network Module.

STEP 3 –The login screen appears.

STEP 4 –Enter the user name in the User Name field. The default user name is admin.

STEP 5 –Enter the password in the Password field. The default password is admin.

STEP 6 –The password must be changed at first login.

STEP 7 –Click Login. The Network Module web interface appears.

2.3.2 Finding and setting the IP address

2.3.2.1 Your network is equipped with a BOOTP/DHCP server (default)

2.3.2.1.1 Read from the device LCD

If your device has an LCD, from the LCD’s menu, navigate to Identification>>>"COM card IPv4".

Note the IP address of the card.

Go to the section: Accessing the web interface through Network.

Security settings in the Network Module may be in their default states.

For maximum security, configure through a USB connection before connecting the network cable.

It is highly recommended that browser access to the Network Module is isolated from outside access using a

firewall or isolated network.

Note: some older Devices may not be able to display the IP address even if they have an LCD. Please consult the

Device manual.

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical