Loading ...
Loading ...
Loading ...
Maintenance
Contextual help of the web interface – 108
b Version/Sha
Displays the associated firmware version and associated Sha.
c Generated on
Displays the release date of the firmware.
For better performance, security, and optimized features,Eatonrecommends to upgrade the Network Module regularly.
d Installation on
Displays when the firmware was installed in the Network Module.
e Activated on
Displays when the firmware was activated in the Network Module.
3.8.1.2 Upgrade the Network Module firmware
During the upgrade process, the Network Module does not monitor theDevice status.
To upgrade the firmware:
1. Download the latest firmware version from the website.For more information, see the
Servicing the Network Management
Module>>>Accessing to the latest Network Module firmware/driver
section.
2. Click+Upload.
3. Click Choose fileand select the firmware package by navigating to the folder where you saved the downloaded firmware.
4. ClickUpload. The upload can take up to 5 minutes.
The firmware that was inactive will be erased by this operation.
When an upgrade is in progress, the upload button is disabled, and the progress elements appear below the table with the
following steps:
Transferring > Verifying package > Flashing > Configuring system > Rebooting
A confirmation message displays when the firmware upload is successful, and the Network Module automatically restarts.
Do not close the web browser or interrupt the operation.
Depending on your network configuration, the Network Module may restart with a different IP address.
Refresh the browser after the Network module reboot time to get access to the login page.
Press F5 or CTRL+F5 to empty the browser to get all the new features displayed on the Web user interface.
Communication Lost and Communication recovered may appear in the Contextual help>>>Alarms section.
Loading ...
Loading ...
Loading ...