Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Accessing the Network Module

Installing the Network Management Module – 14

2.3.3.2.2 Accessing the web interface

STEP 1 –Be sure that the Deviceis powered on.

STEP 2 – On the host computer, download the rndis.7z file from the website www.eaton.com/downloads and extract it. For more

information, navigate toServicing the Network Management Module>>>Accessing to the latest Network Module firmware/

driversection.

STEP 3 – Launch setProxy.bat to add 169.254.* in proxy’s exceptions list, if needed. For manual configuration, navigate to Installing

the Network Management Module>>>Accessing the Network Module>>>Modifying the Proxy exception list

section in the full

documentation.

STEP 4 –Launch a supported browser, the browser window appears.

STEP 5 –In the Address/Location field, enter: https://169.254.0.1, the static IP address of the Network Module for RNDIS. The log

in screen appears.

STEP 6 –Enter the user name in the User Name field. The default user name isadmin.

STEP 7 –Enter the password in the Password field. The default password isadmin.

STEP 8 –ClickLogin. The Network Module local web interface appears.

2.3.4 Accessing the card through serial terminal emulation

This connection is used to access and configure the Network Module network settings locally through Serial (Serial over USB

interface).

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical