Loading ...
Loading ...
Loading ...
CLI
Information – 207
•
•
Trap oid :
.1.3.6.1.4.1.534.10.2.10.x
Trap description
.1.3.6.1.4.1.534.10.2.10.14Sources synchronized
.1.3.6.1.4.1.534.10.2.10.15Output powered by source 1
.1.3.6.1.4.1.534.10.2.10.16Output powered by source 2
.1.3.6.1.4.1.534.10.2.10.20Remote temperature low
.1.3.6.1.4.1.534.10.2.10.21Remote temperature high
.1.3.6.1.4.1.534.10.2.10.22Remote temperature normal
.1.3.6.1.4.1.534.10.2.10.23Remote humidity low
.1.3.6.1.4.1.534.10.2.10.24Remote humidity high
.1.3.6.1.4.1.534.10.2.10.25Remote humidity normal
.1.3.6.1.4.1.534.10.2.10.26Contact 1 active
.1.3.6.1.4.1.534.10.2.10.27Contact 1 inactive
.1.3.6.1.4.1.534.10.2.10.28Contact 2 active
.1.3.6.1.4.1.534.10.2.10.29Contact 2 inactive
7.6.3 Sensor Mib
7.6.3.1 Sensor Mib traps
This information is for reference only.
Trap oid :
.1.3.6.1.4.1.534.6.8.1.x.x.x
Trap description
.1.3.6.1.4.1.534.6.8.1.1.0.1Sent whenever the sensor count changes after a discovery or removing from the UI.
.1.3.6.1.4.1.534.6.8.1.1.0.2Sent whenever one status of each sensor connected changes.
.1.3.6.1.4.1.534.6.8.1.2.0.1Sent whenever one status of each temperature changes.
.1.3.6.1.4.1.534.6.8.1.3.0.1Sent whenever one status of each humidity changes.
.1.3.6.1.4.1.534.6.8.1.4.0.1Sent whenever one status of each digital input alarm changes.
7.7 CLI
CLI can be accessed through:
SSH
Serial terminal emulation (refer to section
Servicing the Network Management Module>>>Installing the Network
Module>>>Accessing the card through serial terminal emulation).
It is intended mainly for automated configuration of the network and time settings of the network card. It can also be used for
troubleshooting and remote reboot/reset of the network interface in case the web user interface is not accessible.
Loading ...
Loading ...
Loading ...