Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Switching to static IP (Manual) / Changing IP address of the Network Module

Servicing the Network Management Module – 145

•

Peel off the protection :

Change the position of switch number 3, this change is detected during next power ON and the sanitization will be applied :

Case 1 :

Case 2 :

Replace the Network Module and secure the screw, connect the Network cable, if needed.

Connect the Network Module byusing the default credentials of the main administrator : admin/admin.

You will beforced tochange the password accordingly to the current password strength rules.

4.13 Switching to static IP (Manual) / Changing IP address of the

Network Module

Administrators can switch to static IPin the Settings menu and change the IP address of the Network Module.

Navigate to

Contextual help>>>Settings>>>Network & Protocol>>>IPV4.

Select Manual (Static IP).

Input the following information:

IPv4 Address

Subnet Mask

Default Gateway

Save the changes.

4.14 Reading device information in a simple way

4.14.1 Web page

The product information is located in the

Contextual help>>>Home>>>Energy flow diagram>>>Details,specifically with the button

on the top of the diagram:

Changes of the switches 1, 2 or 4 has no effect.

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical