Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Accessing the Network Module

Installing the Network Management Module – 15

2.3.4.1 Connecting the configuration cable

STEP 1 – Connect the Micro-B to USB cable to a USB connector on the host computer.

STEP 2 – Connect the cable to the Settings connector on theNetwork Module.

2.3.4.2 Manual configuration of the serial connection

STEP 1 –On the host computer,download therndis.7z file from the website www.eaton.com/downloads and extract it.

STEP 2 – Plug the USB cable and go toWindows® Device Manager.

STEP 3 – Check the CDC Serial in the list, if it is with a yellow exclamation mark implying that driver has not been installed follow

the steps 4-5-6-7 otherwise configuration is OK.

STEP 4 – Right click on it and select Update Driver Software. When prompted to choose how to search for device driver software,

choose Browse my computer for driver software. Select Let me pick from a list of device drivers on my computer.

STEP 5 – Select the folder where you have previously downloaded the driver file Click on Next.

Serial driver is used to emulate a serial connection from USB.

After the card is connected to the PC, manual configuration of the driver is needed for

Windows® OS to discover

the serial connection.

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical