Tripp Lite EVMAGU23X NEW Eaton G4 Gigabit Network Module GNM Firmware User Guide

Loading ...

Settings

Contextual help of the web interface – 85

•

a Manual

Select Manual, and then enter the network settings if the network is not configured with a BootP or DHCP server.

Enter the IP Address.

The Network Modulemust have a unique IP address for use on a TCP/IP network.

Enter the netmask.

The netmask identifies the class of the sub-network the Network Module is connected to.

Enter the gateway address.

The gateway address allows connections to devices or hosts attached to different network segments.

b DHCP

Select dynamic DHCP to configure network parameters by a BootP or DHCP server.

If a response is not received from the server, the Network Module boots with the last saved parameters from the most recent

power up. After each power up, the Network Module makes five attempts to recover the network parameters.

3.7.4.1.2 IPv6

IPV6 status and the first three addresses are displayed.

Press theEditbutton toconfigure the network settings and get more information and access to the following IPV6 details.

Loading ...

Tripp Lite EVMAGU23X NEW Eaton G4 Universal-Input Managed PDU, 208V and 415/240V, 42 Outlets, Input Cable Sold Separately, 72-Inch 0U Vertical