Loading ...
Loading ...
Loading ...
80
4. Telnet/SSH Console
The Auto Probe feature allows for the automatic execution of an action when triggered by an unsuccessful confirmation of network connectivity,
using Ping and/or NTP probes. For example, an LX Platform PDU can be configured to ping a router over the network; if the router fails to respond,
the PDU will automatically power cycle one of its outlets – to which the router is connected – thereby power cycling the router.
When an Auto Probe is added, an event bearing the name of the probe is automatically associated to it. As with other events, actions can be
added to the Auto Probe event via the Web or menu interfaces and/or CLI . Email, SNMP trap and logging actions are associated with Auto Probes,
as a default
Note: This feature is not available with firmware versions before 15.5.2.
-------- Remote Services -----------------------------------------------------
1- Email Settings
2- Remote Syslog Servers
3- Auto Probes
X- Network Configuration
M- Return to Main Menu
<ENTER> Refresh Menu
>> 3
-------- Auto Probes ----------------------------------------------------------------------
-----------------------------------------------------------------------------------------
# | Name | Type | Primary Address | Interval | Retries | Status
-----------------------------------------------------------------------------------------
1 Ping Watchdog Ping 10.22.0.1 3 5 Okay
2 NTP Watchdog NTP 10.22.0.2 15 3 Fault
3 Probe 3 NTP 10.22.0.5 3 5 InitFl
4 Probe 4 NTP 10.22.0.6 15 4 Okay
#- Auto Probe
0- Add New Auto Probe
X- Remote Services
M- Return to Main Menu
<ENTER> Refresh Menu
>> 1
-------- Auto Probes -----------------------------------------------------------
-----------------------------------------------------------------------------
# | Name | Type | Primary Address | Interval | Retries | Status
-----------------------------------------------------------------------------
1 Ping Watchdog Ping 172.17.48.192 3 3 Okay
2 NTP Watchdog NTP 10.22.0.1 3 3 Off
#- Auto Probe
0- Add New Auto Probe
X- Remote Services
M- Return to Main Menu
<ENTER> Refresh Menu
>> 2
-------- Auto Probe Detail Menu ------------------------------------------------
Type : NTP
Name : NTP Watchdog
Description : Default Watchdog NTP Probe
Primary Address : 10.22.0.1
Primary Port : 123
Secondary Address : 12.22.0.2
Secondary Port : 123
Interval : 3
Retries : 3
Enabled : No
4.3.3.3 Auto Probes
Loading ...
Loading ...
Loading ...