Loading ...
Loading ...
Loading ...
63
4. Telnet/SSH Console
192.168.1.1 (single) 255.255.255.255
192.168.1.0 (range) 255.255.255.0
192.168.0.0 255.255.0.0
192.0.0.0 255.0.0.0
0.0.0.0 (everyone) 0.0.0.0
Although the concept of realms may seem similar to outlet groups, it provides no other grouping functionality other than permissions.
The access level to the realms indicated is Read/Write. Each load may optionally be assigned to
a realm. Whatever loads belong to the realms indicated here, the user may access. In order to
correctly access the data, a user should have at least Read Only permission for Device Status and
Device Loads to be able to user the realms.
ACL IP Address (Users with SNMP Access Only)
This defines what IP Address (or Addresses when used with the ACL IP Mask) from which this user may access the data via SNMP.
ACL IP Mask (Users with SNMP Access Only)
This defines the Subnet Mask to user with the ACL IP Address to determine if an address is one from which the user is allowed to access the data
via SNMP.
Password (N/A for SNMPv1 or SNMPv2c)
This is the user password for logging in. For SNMP V3 users, this is the Priv Password.
Auth Password (N/A for SNMPv1 or SNMPv2c)
For SNMP v3 Users only, this is the Auth Password.
Idle Timeout in Minutes (N/A for SNMPv1 or SNMPv2c)
This applies to data access other than SNMP which does not use the concept of a logged in session. This is the amount of time the session can be idle
before it will time out and no longer have access to the data. When the value is 0, that means idle sessions will not time out.
Session Expiration Minutes (N/A for SNMPv1 or SNMPv2c)
This applies to data access other than SNMP which does not use the concept of a logged in session. This is the amount of total time a session
may last whether or not the session is idle or active. When the value is 0, the session will not expire.
Loading ...
Loading ...
Loading ...