Loading ...
Loading ...
Loading ...
74
4. Telnet/SSH Console
4.3.2.3 SNMP Settings
This menu allows the user to configure SNMP set and get settings.
-------- SNMP Settings ---------------------------------------------------------
Automatically Start SNMP : Yes
SNMP Port : 161
Enable SNMP V1 : Yes
Enable SNMP V2c : Yes
Enable SNMP V3 : Yes
1- Automatically Start SNMP
2- SNMP Port
3- Enable SNMP V1
4- Enable SNMP V2c
5- Enable SNMP V3
A- Apply Changes
X- User Access Interfaces
M- Return to Main Menu
<ENTER> Refresh Menu
>>
Menu Data
Automatically Start SNMP
This menu asks if, when the card is started, the SNMP application
should be started as well. Valid Values:
• Yes
Start the application.
• No
Do not start the application.
SNMP Port
If the application is to be started, then this is the port to use for SNMP
set and get requests.
Enable SNMP V1
This indicates if SNMPv1 should be enabled on card startup.
Enable SNMP V2c
This indicates if SNMPv2c should be enabled on card startup.
Enable SNMP V3
This indicates if SNMPv3 should be enabled on card startup.
Note: The SNMP enable flags will not change the default local users created.
This menu allows the user to configure FTP / SFTP settings. The example below shows how to change the (default) setting to disable automatic
start up with Secure FTP. Note that this setting is not available with firmware versions before 15.5.2.
-------- User Access Interfaces ------------------------------------------------
1- Telnet/SSH
2- Web
3- SNMP
4- FTP/SFTP
X- Network Configuration
M- Return to Main Menu
<ENTER> Refresh Menu
>> 4
-------- FTP/SFTP Settings -----------------------------------------------------
Automatically Start Secured FTP : Yes
1- Automatically Start Secured FTP
A- Apply Changes
X- User Access Interfaces
M- Return to Main Menu
<ENTER> Refresh Menu
>> 1
4.3.2.4 FTP/SFTP
Loading ...
Loading ...
Loading ...