Tripp Lite PDU3EVS6L2130 User's Guide

Loading ...

4. Telnet/SSH Console

4.2.2.1.5 Applying Actions to Events

Choosing this option begins the process of assigning the action to events. Each event has both a “Set” and a “Clear” action associated with it.

The action being updated must be used for the “Set” action or both “Set” and “Clear” actions, as appropriate. Ramp actions are only allowed to be

used for the “Clear” action and will not be present this option. The steps necessary to assign the actions to events are as follows:

1. Choose “Set” and “Clear” action pair.

2. Choose events that the use “Set” and “Clear” actions.

Choosing the Set and Clear Actions

Once all the data for an action proﬁle has been saved, the user will have the option to apply the action to events. The next step presented depends

upon the type of action proﬁle being updated. The action proﬁle being updated will at least be the “Set” action, unless the action type is not

allowed to be used for the set action. At this time, the only type of action that cannot be used for the set action is Ramp action.

Actions to Using Both Set and Clear

For Email and SNMP Trap notiﬁcations, the same action is automatically used for both “Set” and “Clear” responses. The menu will proceed directly

to choosing the events to correspond to these actions.

Actions Types Allowed for Set Only

Shed action proﬁles are only allowed to be used as the “Set” action on events. In the menu, only the option to use the action for “Set” will be

given. The following is an example of the menu displayed for this action proﬁle type.

-------- Actions Set/Clear -----------------------------------------------------

Using Action For Alarm Condition

S- Continue to Apply to Device Events

X- None

M- Return to Main Menu

<ENTER> Refresh Menu

Action Types Allowed for Clear Only

Ramp Action proﬁles are only allowed to be used in conjunction with Shed Action proﬁles and therefore must be a “Clear” action on events. Since

the “Set” action must be chosen before the “Clear” action, the Ramp action will not be present in the “Set” menu and cannot be the ﬁrst action

applied to an event.

Action Types Allowed for Both Set and Clear

The action types not already covered are allowed to be used for both the event “Set” and “Clear” actions. Unlike the notiﬁcation actions, where it

is desirable for the “Set” and “Clear” action to be the same, the preference for these actions is that the “Set” and “Clear” actions be of the same

type, but not the same action. The types covered here are Load Control Actions, Control Execution and SNMP Set OID. The following is an example

of the menu presented for these action types.

Loading ...

Tripp Lite PDU3EVS6L2130 10kW 200-240V 3PH Switched PDU, LX Interface, Gigabit, 30 Outlets, L21-30P Input, LCD, 1.8 m Cord, 0U 1.8 m Height, TAA