Loading ...
Loading ...
Loading ...
73
SIGNATURE RAILING
TREX SIGNATURE
®
(FORMERLY REVEAL
®
) RAILING
NOTES:
» SIGNATURE POSTS CANNOT BE USED WITH SIGNATURE TRADITIONAL OR SIGNATURE COCKTAIL DESIGNS, ONLY PRESSURE-TREATED POSTS/
POST SLEEVES CAN BE USED. REFER TO DETAILED INSTRUCTIONS FOR MORE INFORMATION.
» SIGNATURE RAILINGS ARE DESIGNED TO BE ATTACHED WITH POSTS INSTALLED AT A CLEAR SPAN OF 6' (1.83 M) OR 8' (2.44 M).
» IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING POST-TO-POST CONFIGURATION, THE BOTTOM RAIL WILL NOT
NEED TO BE CUT, BUT THE TOP RAIL WILL NEED TO BE MEASURED (MAKING SURE BALUSTERS LINE UP VERTICALLY) AND CUT.
» IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING CROSSOVER POST CONFIGURATION (SPANS FROM ONE
CROSSOVER POST TO ANOTHER CROSSOVER POST), BOTH THE BOTTOM RAIL AND TOP RAIL WILL NOT NEED TO BE CUT.
» IN ADDITION, AT ALL FINAL END POST CONFIGURATIONS, TOP RAIL WILL NEED TO BE MEASURED (MAKING SURE BALUSTERS LINE UP
VERTICALLY) AND CUT.
» SEE INFORMATION WITHIN DETAILED INSTRUCTIONS FOR MORE INFORMATION.
» SEE PAGE 54 FOR SKU NUMBERS.
G
C
I
A
D
K
L
J
E
B
H
H
I
K
M
N
O
P
F
Square Round
BALUSTER OPTIONS
DETERMINING BALUSTERS NEEDED
Baluster
Type
Per 6'
Section
Per 8'
Section
Per 6' Stair
Section
Per 8' Stair
Section
Square 15 20 13 17
Round 15 20 13 17
A. Signature top rail and crowned cover
- 6' (actual length 73.5" [186.7 cm])
- 8' (actual length 97.5" [247.7 cm])
B. Signature bottom rail and fl at cover
- 6' Rail (actual length 71.5" [181.6 cm])
- 6' Cover (actual length 70.0" [177.8 cm])
- 8' Rail (actual length 95.5" [242.6 cm])
- 8' Cover (actual length 94.0" [238.8 cm])
C. Signature upper rail bracket and cover
D. Signature lower rail bracket and cover
E. Signature balusters (square or round)
F. Signature center baluster (square or round)
G. Signature foot block**
H. Signature post skirt or post sleeve skirt*
I. Signature post*
(2" or 2.5" depending on application)
- 36" (actual length 37" [94.0 cm])
- 42" (actual length 43" [109.2 cm])
or Trex 4" x 4" post sleeve*
- 36" (actual length 39" [99.1 cm])
- 42" (actual length 45" [114.3 cm])
NOTE: MUST USE TREX DECK MOUNT POST HARDWARE
AND METAL PLATE WHEN ATTACHING SIGNATURE POSTS.
NOTE: THIS IS AN OVERVIEW OF ALL RAILING COMPONENTS FOR SIGNATURE HORIZONTAL APPLICATIONS – REFER TO DETAILED INSTRUCTIONS
FOR SPECIFIC RAILING CONFIGURATIONS.
J. Signature crossover post*
- 36" (actual length 34.5" [87.6 cm])
- 42" (actual length 40.5" [102.9 cm])
K. Signature post cap or post sleeve cap*
L. Trex decking
M. Trex Fascia
N. Code-approved wood joist 2" x 8"
(5.1 cm x 20.3 cm) or larger
O. Code-approved wood rim joist 2" x 8"
(5.1 cm x 20.3 cm) or larger
P. Crossover bracket cover (supplied with crossover post)
* Item not included in Signature Railing kits. Both 4" x 4" (10.2 cm x
10.2 cm) and 6" x 6" (15.2 cm x 15.2 cm) post sleeves are designed to fit
over 4" x 4" pressure-treated post.
** Required ONLY for All Clear Span Applications over 6' (1.83 m) when
smaller fixed baluster is fully centered, or unsupported spans greater than
5' (1.52 m) (example: 8' (2.44 m) span cut into one 5' (1.52 m) span and
one 3' (0.91 m) span would require foot block under 5' (1.52 m) span since
smaller fixed baluster is no longer centered). Included with 8' (2.44 m)
railing kits.
NOTE: If installing 42" (106.7 cm) railing, and using pressure-treated posts with Trex
post sleeves, ensure that a longer pressure-treated post is used along with longer
post sleeve, both cut to a height of 46" (116.8 cm) from decking surface.
PARTS
Loading ...
Loading ...
Loading ...