Loading ...
Loading ...
Loading ...
69
TRANSCEND RAILING
HOW TO INSTALL ON-AN-ANGLE RAILING
TREX TRANSCEND (CROWN AND UNIVERSAL RAILING)
NOTE: Trex railing brackets are designed to be installed
up to a 45° angle.
» Small angles (1° - 30°). Both 4" x 4" (102 mm x
102 mm) or 6" x 6" (152 mm x 152 mm) post sleeves
work well.
» Large angles (31° - 45°). USE ONLY 6" x 6"
(152 mm x 152 mm) post sleeves when installing on
fl at side.
» 45° angles using 4" x 4" (102 mm x 102 mm) post
sleeves MUST use Transcend Bird’s Mouth brackets.
NOTE: Railing will be installed on corner of posts.
» Using 6" x 6" (152 mm x 152 mm) post sleeves at
45° angles. Brackets are installed off-center and use
45° Transcend gaskets.
» Railing gaskets are designed to fi t at 0°, 22.5°, and 45°
angles. Gaskets are labeled with appropriate angle
dimension.
4 x 4 6 x 6
HOW TO INSTALL CROWN AND UNIVERSAL BIRD'S MOUTH RAILING
TREX TRANSCEND
NOTES:
» Use with 4" x 4" (102 mm x 102 mm) post sleeve ONLY.
» Gaskets are only designed for use with Transcend
Crown and Universal Railing.
Read all instructions BEFORE installation.
PARTS
Mark Posts
1. Measure and mark
4 " (102 mm) and
3 3 - 9 / 1 6 " (852 mm) up
from top of post skirt.
NOTE: Without skirt,
add 1-1/2 " (38 mm) to
measurements.
Attaching Adapters Snap
adapters into RSBs.
Pre-drill Bottom and Top RSBs
2. Position RSBs with adapter (fl at side DOWN) for
lower rail, mark and pre-drill screw holes with
1/8 " (3 mm) drill bit on post.
3. Position RSBs with adapter (fl at side UP) for top rail,
mark and pre-drill screw holes with 1/8 " (3 mm) drill
bit on post.
Top bracket
Adapter
Adapter
Bottom bracket
1
4"
(102 mm)
33-9/16"
(852 mm)
for 36"
(914 mm)
33-9/16"
(852 mm)
for 36"
(914 mm)
2
3
Loading ...
Loading ...
Loading ...