Loading ...
Loading ...
Loading ...
37
HOW TO INSTALL DECKING
HOW TO INSTALL STAIR TREADS
(TREX TRANSCEND, ENHANCE, SELECT, AND ESCAPES)
Installation Options
NOTE: For best results, use square edge decking
and manually route sides that will be used to attach
hidden fasteners.
Option 1:
Face Screw
1. Install start clips against riser on each step.
2. Install fi rst board. Follow steps on page 35.
3. Install second board. Follow steps on page 35.
4. Secure with screws from top of second board into
stringer boards.
Option 2:
Using 2" x 4" (51 mm x 102 mm) Wood
Support Blocks
1. Install start clips against riser on each stair tread.
2. Install fi rst board. Follow steps on page 35.
3. Attach 2" x 4" (51 mm x 102 mm) blocks between
stringers.
4. Pre-drill holes up through blocks.
5. Install second board. Follow steps on page 35.
6. Secure with screws from bottom through blocks
and into stair treads.
Decking board
Option 1
Face Screw
Connector Clip (Stainless Steel Fastener)
Start Clip
Deck Frame
Stringer
Option 2
Riser
3
Insert Fasteners
Insert Fasteners
HOW TO REPLACE TREX BOARDS/CONTINUED
INSTALLED WITH TREX HIDEAWAY UNIVERSAL FASTENERS (TREX TRANSCEND,
ENHANCE, SELECT, AND ESCAPES)
Universal Fasteners
3. Slide a fastener for each joist into board grooves
from both ends of the board.
NOTE: You may have to loosen adjacent boards to slide
fasteners into position.
4. Position replacement board and secure fasteners
on center of each joist.
Pressure-treated 2x4
fastened to stringer
Universal fasteners may also be
used to join the decking boards
Loading ...
Loading ...
Loading ...