Loading ...
Loading ...
Loading ...
107
SIGNATURE RAILING
C
A
D
K
J
E
B
H
H
I
M
L
N
F
F
GG
NOTES:
» SIGNATURE RAILINGS ARE DESIGNED TO BE ATTACHED WITH POSTS INSTALLED AT A CLEAR SPAN OF 6' (1.83 M) OR 8' (2.44 M).
» IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING POST-TO-POST CONFIGURATION, THE BOTTOM RAIL WILL NOT
NEED TO BE CUT, BUT THE TOP RAIL WILL NEED TO BE MEASURED AND CUT.
» IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING CROSSOVER POST CONFIGURATION (SPANS FROM ONE
CROSSOVER POST TO ANOTHER CROSSOVER POST), BOTH THE BOTTOM RAIL AND TOP RAIL WILL NOT NEED TO BE CUT.
» IN ADDITION, AT ALL FINAL END POST CONFIGURATIONS, TOP RAIL WILL NEED TO BE MEASURED AND CUT.
» SEE INFORMATION WITHIN DETAILED INSTRUCTIONS FOR MORE INFORMATION.
» SEE PAGE 54
FOR SKU NUMBERS.
A. Signature upper rail cover*
- 6' (actual length 73-1/2" [1867 mm])
- 8' (actual length 97-1/2" [2477 mm])
B. Signature Panel (includes top and bottom railings and
square balusters)
C. Crossover bracket cover (supplied with crossover post)
D. Signature crossover post**
- 36" (actual length 34-1/2" [876 mm])
- 42" (actual length 40-1/2" [1029 mm])
E. Signature foot block***
F. Signature post skirt or post sleeve skirt**
G. Signature post**
2-1/2"
- 36" (actual length 37" [940 mm])
- 42" (actual length 43" [1092 mm])
or Trex 4x4 post sleeve**
- 36" (actual length 39" [991 mm])
- 42" (actual length 45" [1143 mm])
H. Signature post cap or post sleeve cap**
I. Signature upper rail bracket and cover
J. Signature lower rail bracket and cover
K. Trex decking
L. Code-approved wood joist 2" x 8" (51 mm x 203
mm) or larger
M. Trex™ Fascia
N. Code-approved wood rim joist 2" x 8" (51 mm x
203 mm) or larger
* Covers are slightly longer to accommodate crossover post
applications.
** Item not included in Signature Panel kits. Both 4" x 4" (102 mm
x 102 mm) and 6" x 6" (152 mm x 152 mm) post sleeves are
designed to fit over 4" x 4" pressure-treated post.
*** Required ONLY for all clear span applications over 6' (1.83 m)
when fixed baluster is centered or unsupported spans greater
than 5' (1.52 m). For example, if an 8' (2.44 m) panel is cut into
a 5-1/2' (1.68 m) section, it would require a foot block due to the
off-center placement of the fixed baluster.
NOTE: If installing 42" (1067 mm) railing, and using pressure-treated
posts with Trex post sleeves, ensure that a longer pressure-treated
post is used along with longer post sleeve, both cut to a height of 46"
(1168 mm) from decking surface.
PARTS TOOLS NEEDED
NOTES:
» Trex Assembled Signature Panels DO NOT
come with foot blocks. You must purchase foot
blocks separately. SKU – BKALFTBLK (one per
panel required on spans greater than 6', see note
below***).
» Trex Assembled Signature Panels DO NOT
come with brackets and screws. You must
purchase the horizontal rail hardware separately.
SKU – BKFHBKTAL (one per panel).
TREX SIGNATURE (FORMALLY REVEAL) PANELS
Loading ...
Loading ...
Loading ...