Loading ...
Loading ...
Loading ...
INTEGRAL FLASH
The integral ash unit features the following specications:
Guide no. 12
Coverage 56º horizontal, 44º vertical
Maximum light fall-off at side centres - 1EV (50%)
Colour temperature (full ash) 5,000 – 5,600º K
To raise the ash unit into its operative position, slide the ash-
back catch backwards in the direction of the ash symbol. To
return the ash unit into its closed position, push down on the
top of the back until it clicks back into place. The ash unit is
automatically activated when it is in the operative position and
de-activated when returned to its stored position.
The green LED ash symbol blinks in the viewnder when the
ash unit is charging and remains stationary when fully charged.
The ash output can also be adjusted for optimum light balance
in ll-ash situations.
Using the integral ash:
1 Slide the ash-back catch backwards in the direction of the
ash symbol.
2 On the Camera Sensor Unit Display select Camera >
Exposure and scroll down to Flash..
3 Choose between Normal or Rear sync.
4 Exit the Main Menu to Save and make an exposure.
5 If the settings were incorrect to match the output of the ash
unit, the viewnder display shows a red triangle alongside a
ashing green ‘ash’ symbol plus a warning message - ‘Low
ash’. The grip display will also show a warning message -
‘Low ash’.
Conventional measures should then be taken to correct
the situation, move closer to the main subject, use a larger
aperture setting or use a higher ISO setting.
Note!
Do not use the integral ash together when another external TTL
ash unit is connected (and used in TTL or A mode).
Note!
For full coverage with the integral ash, use 80mm or longer
lenses (without a lens shade).
H6D www.hasselblad.com
USER GUIDE
To Use
96
1 Integral ash
2 Integral ash release
1
2
Loading ...
Loading ...
Loading ...