Loading ...
Loading ...
Loading ...
FORMAT CFAST AND SD CARDS
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT CFast
The camera is only able to read and write to storage media
that have been formatted correctly. New cards sometimes
have no formatting, or you might want to convert a card that
is currently using a format that the camera cannot read. In
either case, you must reformat both CFast cards and SD cards
in the sensor unit for H6D use.
There are two ways to format cards. The quickest way is to
use the Format card button on the grip but if you prefer, you
can also use the menu on the sensor unit.
FORMAT BUTTON
Press the Format button (A) on the camera grip. It is purposely
recessed to avoid unintentional use, so use a ballpoint pen
or similar. A prompt is displayed on the sensor unit for
conrmation. It is also possible to press the format button with
a hard press with a ngertip.
FORMAT MEMORY CARDS VIA SENSOR UNIT
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT SD
1 Press MENU.
2 Navigate to Storage (use the Rear scroll wheel or navigate
via the touch screen).
3 Navigate to Format Card (use the Rear scroll wheel or
navigate via the touch screen).
4 Click on the button Format CFast or Format SD.
5 Conrm by pressing Format.
Swipe right or press Menu / EXIT button to get back to Main
Menu.
Note!
All CFast and SD memory cards should be formatted in the
sensor unit before using them the rst time.
Note!
Only UDMA/type 4/60MBs (or 400x) cards or better are
recommended for H6D use.
H6D www.hasselblad.com
USER GUIDE
To Use
131
A
Storage Menu
Loading ...
Loading ...
Loading ...