Loading ...
Loading ...
Loading ...
3.22 REMOVE AND ATTACH THE VIEWFINDER
To remove, hold the viewnder in the right hand and while
pressing the viewnder release button (1), lift the rear of the
viewnder up and away from the camera body (2).
To attach, hold the viewnder at a slight angle and rest it
on the top of the camera. Slide the viewnder forward until
the front locating pin is in position in the recess in the front
edge of the viewnder screen aperture on camera body.
Press the rear part of the viewnder rmly downwards until
it clicks into place.
Ensure that both sides of the viewnder are seated correctly
and that it has been rmly attached and locked into position.
Failure to do so could cause an intermittent malfunction
if the data bus interface connections between the viewnder
and camera body are not positively secured.
Note!
Do not lift or hold the camera by the viewnder alone.
1
2
H6D www.hasselblad.com
USER GUIDE
Overview
43
Loading ...
Loading ...
Loading ...