Loading ...
Loading ...
Loading ...
FORMATTING MEMORY CARDS
MAIN MENU > GENERAL SETTINGS > STORAGE
The camera is only able to read and write to storage media
that have been formatted correctly. New cards sometimes
have no formatting, or you might want to convert a card that
is currently using a format that the camera cannot read. In
either case, you must reformat both CFast cards and SD cards
in the sensor unit for H6D use.
There are two ways to format cards. The quickest way is to
use the Format card button on the grip but if you prefer, you
can also use the menu on the sensor unit.
FORMAT BUTTON
Press the Format button (A) on the camera grip. It is purposely
recessed to avoid unintentional use, so use a ballpoint pen
or similar. It is also possible to click the button with a hard
press with the tip of your thumb. A prompt is displayed on the
sensor unit for conrmation.
FORMAT MEMORY CARDS VIA SENSOR UNIT
MAIN MENU > GENERAL SETTINGS > STORAGE
1 Press MENU.
2 Navigate to General Settings.
3 Choose Storage.
4 Navigate to Format Card.
5 Navigate to Format CFast or Format SD.
6 Conrm by pressing OK (Display button).
Note!
Only UDMA/type 4/60MBs (or 400x) cards or better are
recommended for H6D use. See full list in ‘Appendix’ in this
manual.
Note!
All CFast and SD memory cards should be formatted in the
sensor unit before using them the rst time.
Note!
You can add a Favourite function on the Main Menu if you often
use formatting.
Storage Menu
Overow
A
H6D www.hasselblad.com
USER GUIDE
Overview
50
Loading ...
Loading ...
Loading ...